Introduction

We recently added the Wireguard VPN protocol to both the Lean Seedbox and the Premium Seedbox, so in this article, we will show you how to use it if you are using Windows.

Premium Seedbox

Step 1

As of this moment, Wireguard doesn't come preinstalled on the Premium Seedboxes, so the first step is the installation. Please use the One-Click Installers to install it.

Step 2

After you've installed Wireguard through the OCI, log in to your HTTPS Web Access and access the Wireguard configuration file and the QR code.

Step 3

From here, everything is the same on both Seedbox Plans.

To continue, please move to Step 2 from the Lean Seedbox section.

Lean Seedbox

Step 1

From your Client Area, log in to the Wireguard configuration page.

After entering your credentials, you'll see your Wireguard Configuration page, which would look like this.

Step 2

On your iPhone, please go to the Apple AppStore and download the Wireguard app.
https://apps.apple.com/us/app/wireguard/id1441195209

After you have installed the Wireguard app on your iPhone, you're ready to Add a new configuration profile!

You can select "Scan QR Code" and head back to your HTTP Wireguard Configuration we found earlier and scan it.

Step 5

Congratulations! You've successfully connected to your seedbox Wireguard VPN. Now you can enjoy total privacy without worrying about spying eyes. Wireguard is much more performant than OpenVPN, and not sharing your connection with other users allows you to use your VPN connection at HIGH SPEEDS!!

*If you would like to confirm that your public IP has changed, you can head here

If you're using Linux, check out this article.

If you're using Windows, check out this article.

I don't know what to do next...

If you need any assistance, let us know by opening a chat in the bottom right corner of your screen. We're here to help 😄


Did this answer your question?