We recently added the Wireguard VPN protocol to both the Swift, Supreme, Fast, Stream, Rapid, and Furious Seedboxes. In this article, we will show you how to use it if you are using macOS.

As of this moment, Wireguard doesn't come preinstalled on the Fast, Stream, Rapid, and Furious Seedboxes, so the first step is the installation. You'll have to use One-Click Installers for installation.

After that, you can obtain Wireguard from Apple Store

After you've installed Wireguard through the One-Click Installers, log in to your HTTPS Web Access and access the Wireguard configuration file and the QR code.

From here, everything is the same on all Seedbox Plans.

To continue, please move to Step 2 from the Lean Seedbox section.

From your Client Area, login to the Wireguard configuration page.

After entering your credentials you'll see your Wireguard Configuration page, which would look like this.

Secondly, let's download and install the Wireguard official client from the Apple AppStore.

Now, let's save our wireguard client configs that you have at step 1

Open the Terminal and with your text editor of choice create the file where ever you like the most, I'll call the file rsb-vpn.conf - the name is the least relevant here, but the extension is all that we care about - .conf

Copy-paste the configs inside the file

Press Control+x then press y to save

Finally, open the Wireguard client app and import the config file.

Then hit Allow, when prompted about adding the config file.

Activate the connection.

If you see Status: active, you're done. Enjoy

If you will you can check what's your new public IP here

If you need any assistance, let us know by opening a chat in the bottom right corner of your screen. We're here to help 😄